Hydraulic Cylinders and Rams

Power Team offers you a complete selection of cylinder styles, tonnages and stroke lengths.
Click on any link below to go to the cylinder & ram of your choice:

Single Acting Hydraulic Cylinders (Rams)

• Capacities range from 5 to 150 tons, stroke lengths from 25.4 to 406mm. Over 40 models to choose from.

• On 5 to 25 ton cylinders, adapters and accessories are available for attachment to the cylinder’s base or piston, to  apply force for spreading, lifting or other tasks. Swivel caps are available for 10, 15, 25, 55 and 75 ton cylinders.

• Collar threads permit mounting cylinders in a fixture or attachment. Base mounting holes and threaded piston rod ends also provided for versatility of application.

• Locking collar models are ideal for jobs in which the lifted load will remain supported for extended periods of time.

Back to top

Low Profile Hydraulic Cylinders (Rams)

• Capacity range from 5 to 150 tons, stroke lengths from 11.1 to 15.9mm.

• These are low profile "pancake" cylinders for use where clearances are limited. A unique heavy duty return spring provides rapid return of the piston.

• Swivel caps reduce the effects of off-centre loading.

• Unique Power-Tech surface treatment for corrosion resistance.
  

Back to top

Double Acting Hydraulic Cylinders (Rams)

• Capacity range from 10 to 500 tons, stroke lengths of 152.4 to 511.2mm. Ideally suited to severe applications, high cycle usage, various mountings, production fixtures and cabling.

• Accessory swivel caps on some models reduce the effects of off-center loads.

• Ideal for bridge lifting, building reconstruction, shipyard, utility, mining equipment maintenance and high cycle production applications.

Back to top

Centre-Hole Hydraulic Cylinders (Rams)

• Capacities of 17 1 /2 to 100 tons, stroke lengths of 50.8 to 123.8mm. "Centre-Hole" allows jacking screws, puller screws, cables, etc. to be extended through the cylinder for application versatility.

• A record of proven reliability for over 40 years.
  
  

Back to top

High Tonnage Hydraulic Cylinders (Rams)

• In capacities of 100 to 565 tons, stroke lengths of 50.8 to 254mm.

• Swivel caps reduce the effects of off-centre loading; cylinders may be "dead-ended" without damage. Removable carrying handles.

Back to top

Threaded Base Hydraulic Cylinders (Rams)

• Capacity range from 5 to 150 tons, stroke lengths from 25.4 to 406mm. Over 40 models to choose from.

• On 5 to 25 ton cylinders, adapters and accessories are available for attachment to the cylinder’s base or piston, to apply force for spreading, lifting or other tasks. Swivel caps are available for 10, 15, 25, 55 and 75 ton cylinders.

• Collar threads permit mounting cylinders in a fixture or attachment. Base mounting holes and threaded piston rod ends also provided for versatility of application.

• Locking collar models are ideal for jobs in which the lifted load will remain supported for extended periods of time.
  
  

Back to top

Pull Hydraulic Cylinders (Rams)

• In capacities of 2 and 5 tons, stroke lengths of 5.00" and 5.50".

• Designed for pulling and tensioning applications.

• Heavy duty compression spring provides long cycle life and rapid extension of piston; spring automatically extends piston rod when pump pressure is released.