Hytec Header

 
Hytec in Africa  |  The Hytec Group  |  Logistics  |  Contact Us  |  Tips & Tools  |  Newsletter      
 
 

Hydraulic Jacks

Power Team offers you an extremely wide selection of jacks.
Click on any link below to go to the jack of your choice:
 


Hydraulic Bottle Jacks

Ruggedly built, self-contained jacks offer portable hydraulic power in a lightweight, reliable unit. Comply with ASME B30.1 standard.

  • Serrated caps help stabilize the load a safer lift. Industrial bottle jacks offer heavy duty performance

  • Oil leakage is greatly reduced by welding the jack's pressure cylinder, oil reservoir, pump housing and base into one integrated unit

  • Fewer working parts, internally-machined oil passages and close tolerances set these apart from ordinary bottle jacks

  • Hot forged steel base for extra strength

  • May be used in vertical, angled and horizontal positions

  • Oil bypass system limits stroke of jack by routing oil back to reservoir

  • "Low profile" models are perfect for "close quarters" lifting. Pump handle operates parallel to the base of the jack; ideal for horizontal applications

  • Telescoping Bottle Jacks are also available


Back to top

Inflatable Air Jacks

  • Collapsed thickness of 22mm makes them ideal for
    "close clearance" industrial/construction applications

  • Jacks feature Neoprene rubber construction, reinforced
    with four piles of polyester, for use in rugged conditions

  • Operates at max. air pressure of 116 PSI

  • Provides stable, steady lifting/bending/pushing support
    of cylindrical or unevenly-shaped objects

  • Special non-skid surface

  • 3mm NPT male connector

 


Back to top

Hydraulic Toe-Lift Jacks

  • Jacks comply with ASME B30.1 Standards

  • 5.5 ton and 11 ton capacity units can operate horizontally
    as well as vertically

  • Pressure relief valve prevents overloading

  • Saddle lifts to over 558mm on the J58T and to 635mm on
    the J109T

 


Back to top

Hydraulic Sidewinder Mini Jacks

  • Can be used vertically or horizontally as a jack or spreader to apply force with just over 65mm of clearance needed

  • Weighs only 1.9kg

  • Can be used to turn a mechanical gear puller of five tons or larger into an hydraulic puller

  • Handle operation is especially convenient for horizontal positioning

  • Complies with ASME B30.1 standard

 

 
   
 
 
 
Contact Us | PAI Act | Privacy Policy | Legal Policy